Material · EU445240
Products · 25 items
Orthosis materials on roll are neoprene, textiles, padding and straps sold by the metre or roll to people who make orthoses. This category has 25 products, including NRX® Strap, ARX® Spacer Fabric, Ventus™, Neptune™ and heat-activated tape.
The range has a few main types. Neoprene made of 100% CR foam with a density of 12 degrees (Shore A) comes with nylon, loop textile or a Sharkskin surface. NRX® Strap is microperforated for ventilation and has an elastic loop textile on the outer face. The neoprene and NRX® materials are latex-free.
Choose by what the orthosis has to do. ARX® Spacer Fabric is a ventilating alternative to neoprene with a pressure-relieving core. Ventus™ has Lycra on the outside and fleece on the inside. Neptune™, developed in 2015, is hydrodynamic and dries quickly.
For padding there is P-ARX® Neptune™ in 1.8 mm for tight orthoses and 3.5 mm for pressure relief. They attach to I-ARX® Inner Lining. There is also Velfoam Orthosis Band, DeRon in 3 and 5 mm (sold per square metre) and microfibre upholstery for footbeds.
Straps and fasteners: SRX® Strap grips itself and gives light compression. X-Strap has 2% reduced elasticity. C-Loop Strap is non-elastic and built as a tunnel. See also hook-and-loop and padding.
Several materials can be cut without unravelling, and NRX® Double Soft Elastic has a double-sided soft surface for attaching low-profile hook straps. NRX® Heat Tape has a heat-activated adhesive and can replace stitching. NRX® Loop Heat Tape adds soft loop function to textile surfaces that are hard to sew. Sharkskin Neoprene withstands machine washing at 60 °C and SRX® Strap at 40 °C without fabric softener. The microfibre upholstery is made to order with a longer delivery time. More information is under orthosis materials, or call +46 8 506 766 00 for free advice.
It is how the foam quality is stated in the product information. The neoprene materials are made of 100% CR foam with a density of 12 degrees on the Shore A scale, a hardness scale. NRX® Strap uses the same foam quality. High elasticity makes the material usable in most orthosis designs, and it can be cut without unravelling.
It depends on the orthosis, but ARX® Spacer Fabric was developed as a ventilating alternative to neoprene. NRX® Strap is microperforated for maximum ventilation. Ventus™ and Neptune™ are breathable, and Neptune™ also dries quickly. Compare the properties on each product page.
I-ARX® Inner Lining is an elastic microfibre fabric that is attached permanently to the inside of the orthosis. P-ARX® Neptune™ padding then attaches to the surface of the fabric. The padding comes in 1.8 mm for orthoses with limited space and 3.5 mm when you want pressure relief.
Yes, several can be cut without unravelling or fraying, such as the neoprene materials, SRX® Strap and NRX® Double Soft Elastic. This helps when you shape the orthosis. Always check the product page for the item you choose, since properties vary between materials.
SRX® Strap can be machine washed at 40 degrees. Do not use fabric softener, because it damages the self-gripping effect of the strap. The strap grips itself and gives light compression. Sharkskin Neoprene has a different stated washing temperature, 60 degrees, so always follow the instructions for your product.